Brand
HAAS
Model
ST30
Type
Lathes, CNC
Stock #
64004
Condition
Like New
Year
2019
Location
South Lyon, Michigan
United States
| CNC Control | yes |
| Type of CNC Control | Haas CNC Control |
| CAPACITIES | S.A.E | METRIC |
|---|---|---|
| Chuck Size | 10.0 in | 254 mm |
| Max Part Swing | 21.0 in | 533 mm |
| Max Cutting Diameter (with BOT turret) | 15.00 in | 381 mm |
| Max Cutting Diameter (with BMT65 turret) | 13.75 in | 349 mm |
| Max Cutting Length (varies with workholding) | 32.5 in | 826 mm |
| Bar Capacity | 3.00 in | 76 mm |
| Between Centers | 32.5 in | 826 mm |
| TRAVELS | S.A.E | METRIC |
|---|---|---|
| X Axis | 9.4 in | 239 mm |
| Z Axis | 32.5 in | 826 mm |
| FEEDRATES | S.A.E | METRIC |
|---|---|---|
| Rapids on X | 945 ipm | 24.0 m/min |
| Rapids on Z | 945 ipm | 24.0 m/min |
| AXIS MOTORS | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 4100 lbf | 18238 N |
| Max Thrust Z | 5100 lbf | 22686 N |
| SPINDLE | S.A.E | METRIC |
|---|---|---|
| Spindle Nose | A2-6 | A2-6 |
| Max Rating | 30.0 hp | 22.4 kW |
| Max Speed | 4500 RPM | 4500 rpm |
| Max Torque | 300.0 ft-lbf @ 500 rpm | 407.0 Nm @ 500 rpm |
| Max Torque w/opt Gearbox | 1000 ft-lbf @ 150 rpm | 1356 Nm @ 150 rpm |
| Spindle Bore ø | 3.50 in |
| TURRET | S.A.E | METRIC |
|---|---|---|
| Number of Tools | 12-Station BOT | 12-Station BOT |
| OD vs ID Tools | Any Combination (will vary with turret) | Any Combination (will vary with turret) |
| Boring Bar Rear Clearance (from back of turret ) | 4.00 in | 102.0 mm |
| GENERAL | S.A.E | METRIC |
|---|---|---|
| Coolant Capacity | 55 gal | 208 L |
| AIR REQUIREMENTS | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
| Inline Air Hose | 3/8 in | 3/8 in |
| Coupler (Air) | 3/8 in | 3/8 in |
| Air Pressure Min | 80 psi | 5.5 bar |
| ELECTRICAL SPECIFICATION | S.A.E | METRIC |
|---|---|---|
| Spindle Speed | 3400 rpm | 3400 rpm |
| Drive System | Direct Speed, Belt Drive | Direct Speed, Belt Drive |
| Spindle Power | 30.0 hp | 22.4 kW |
| Input AC Voltage (3 Phase) - Low | 220 VAC | 220 VAC |
| Full Load Amps (3 Phase) - Low | 70 A | 70 A |
| Input AC Voltage (3 Phase) - High* | 440 VAC | 440 VAC |
| Full Load Amps (3 Phase) - High* Equipped with: Parts Catcher System Automatic Tool Presetter Belt Type Chip Conveyor Programmable Tailstock Haas Bar Feeder and Linings 3" Bar |
35 A | 35 A |
48985 Wixom Tech Dr.
Wixom, MI 48393
© 2023 Lee Stevens Machinery